Boats » Haines Hunter Boats » Haines Hunter SF650

Haines Hunter SF650

$ 0.00
  SF650 hero Advert  

Powered with a Yamaha 200hp. Without a doubt the SF650 is the most exceptional rough water boat produced by Haines Hunter. Featuring a 23 degree V hull, generous freeboard,and a heritage that dates back fifty years. You will struggle to find anything that even compares with the overall SF 650 package. Toughened glass windscreen, large forward hatch, enclosed anchor locker, hydraulic steering, built-in boarding platforms, spacious cabin and cockpit, underfloor storage, it’s all here in a no compromise blue water performer. At the helm you’ll find ample space to drive, an instrument panel with room for serious gear, yes this is a boat for the adventurous. Family boating or dedicated fishing the SF 650.

   

Specifications SF650
Overall Length - 6.80m
Beam  - 2.45m
Deadrise - 23 degrees
Recommended HP - 130-200
Dry Hull Weight - 940kg

On Trailer Measurements
(including engine tilted)
Overall Length - 7.80m
Width - 2.45m
Height to top of screen - 2.30m
Standard towing weight* 1750 kg

Factory Options
- Electric toilet
- Centre infill squab
- Baitboard
- Custom ski pole
- CD Stereo c/w marine speakers
- Bimini top complete with rocket launchers
- Automatic power capstan
- Standard power capstan

Standard Features
- Portifino stern / boarding platform
- Stainless steel bowrail
- Boarding ladder
- Self-draining anchor locker
- Roller fairlead & bowsprit
- Brass keel strip
- Hydraulic steering
- Underfloor fuel tank 165 lt.
- Toughened glass windscreen
- Deluxe back-to-back seat
- Adjustable softrider pedestal seat
- Fish bin seats with squabs
- Transom storage locker
- Offshore foredeck hatch
- Deck bollard
- Stern cleats
- 4 x Rod holders
- Navigation lights
- Bilge pump
- Battery isolation switch
- Compass
- Marine grade wiring loom with fused switch panel
- Interior light
- Cockpit lights
- Fully carpeted cockpit & cuddy cabin
- Marine carpet or Nautilex floor covering
- Teak cappings on coamings
- Under floor stowage
- Walk through transom

Supported by our 5 year structural hull warranty. Haines Hunters are amongst the most sought after craft in New Zealand. Our attention to detail ensures that each hull exhibits maximum strength and performance.

All mouldings are completed in a temperature and humidity controlled environment using resins, gelcoats and glass fibre to internationally recognised standards.

Hull Structure
Completely hand laid using:
- Isopthalic gelcoat & resin system for extrastrength and water resistance.
- Multi-layered chopped strand mat with woven rovings
- Tanalised pine longitudinal girders
- Marine grade hardwood ply transverse bulkheads
- Marine grade hardwood ply transom

Deck Structure
- Isopthalic gelcoat
- Orthopthalic resin system, gunstock and coremat
- Tanalised pine deck beams
*NOTE: Standard towing weight will vary with trailer type and motor selection